• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
The default cipher list is aes256-ctr, aes256-cbc, aes192-ctr, aes192-cbc, aes128-ctr, aes128-cbc, 3des-cbc.
Example of Conguring a Cipher List
The following example shows you how to congure a cipher list.
Dell(conf)#ip ssh server cipher 3des-cbc aes128-cbc aes128-ctr
Conguring the SSH Client Cipher List
To congure the cipher list supported by the SSH client, use the ip ssh cipher cipher-list command in CONFIGURATION mode.
cipher-list-: Enter a space-delimited list of ciphers the SSH Client supports.
The following ciphers are available.
• 3des-cbc
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
The default cipher list is in the given order: aes256-ctr, aes256-cbc, aes192-ctr, aes192-cbc, aes128-ctr, aes128-cbc, 3des-cbc.
Example of Conguring a Cipher List
The following example shows you how to congure a cipher list.
Dell(conf)#ip ssh cipher aes128-ctr aes128-cbc 3des-cbc
Secure Shell Authentication
Secure Shell (SSH) is enabled by default using the SSH Password Authentication method.
Enabling SSH Authentication by Password
Authenticate an SSH client by prompting for a password when attempting to connect to the Dell Networking system. This setup is the
simplest method of authentication and uses SSH version 1.
To enable SSH password authentication, use the following command.
• Enable SSH password authentication.
CONFIGURATION mode
ip ssh password-authentication enable
720
Security
To Next Page
Loading...
Need help?
General
