[no] rmon collection history {controlEntry integer} [owner ownername] [buckets bucket-number]
[interval seconds]
• controlEntry: species the RMON group of statistics using a value.
• integer: a value from 1 to 65,535 that identies the RMON group of statistics. The value must be a unique index in the RMON
History Table.
•
owner: (Optional) species the name of the owner of the RMON group of statistics. The default is a null-terminated string.
• ownername: (Optional) records the name of the owner of the RMON group of statistics.
• buckets: (Optional) species the maximum number of buckets desired for the RMON collection history group of statistics.
• bucket-number: (Optional) a value associated with the number of buckets specied for the RMON collection history group of
statistics. The value is limited to from 1 to 1000. The default is 50 (as dened in RFC-2819).
• interval: (Optional) species the number of seconds in each polling cycle.
• seconds: (Optional) the number of seconds in each polling cycle. The value is ranged from 5 to 3,600 (Seconds). The default is
1,800 (as dened in RFC-2819).
Example of the rmon collection history Command
To remove a specied RMON history group of statistics collection, use the no form of this command.
The following command example enables an RMON MIB collection history group of statistics with an ID number of 20 and an owner of
john, both the sampling interval and the number of buckets use their respective defaults.
Dell(conf-if-mgmt)#rmon collection history controlEntry 20 owner john
Remote Monitoring (RMON) 685
To Next Page
Loading...
Need help?
General
