Delta Electronics AC Motor Drive VFD-VE Series - Page 153

Chapter 4 Parameters|
4-104 Revision August 2008, 03VE, SW V2.04
Bit0 Bit1 Bit2 Bit3 Bit4 Bit5 Bit6
Fault code
current Volt. OL SYS FBK EXI CE
27: over-torque 1 (ot2)
●
28: Reserved
29: Reserved
30: Memory write-in error (cF1)
●
31: Memory read-out error (cF2)
●
32: Isum current detection error
(cd0)
●
33: U-phase current detection error
(cd1)
●
34: V-phase current detection error
(cd2)
●
35: W-phase current detection
error (cd3)
●
36: Clamp current detection error
(Hd0)
●
37: Over-current detection error
(Hd1)
●
38: Over-voltage detection error
(Hd2)
●
39: Ground current detection error
(Hd3)
●
40: Auto tuning error (AuE)
●
41: PID feedback loss (AFE)
●
42: PG feedback error (PGF1)
●
43: PG feedback loss (PGF2) ●
44: PG feedback stall (PGF3)
●
45: PG slip error (PGF4)
●
46: PG ref input error (PGr1) ●
47: PG ref loss (PGr2)
●
48: Analog current input loss
(ACE)
●
49: External fault input (EF)
●