Delta Electronics AC Motor Drive VFD-VE Series - Page 52

Chapter 4 Parameters|
Revision August 2008, 03VE, SW V2.04 4-3
Pr. Explanation Settings
Factory
Setting
VF VFPG SVC FOCPG TQRPG
4: Stall prevention by auto accel./decel. (limited by 01-12
to 01-21)
00-14
Time Unit for
Acceleration/Deceleration
and S Curve
0: Unit: 0.01 second
1: Unit: 0.1 second
0
○ ○ ○ ○
00-15 Reserved
00-16 Reserved
00-17
Carrier Frequency
1~15KHz 10
○ ○ ○ ○ ○
00-18
Auto Voltage Regulation
(AVR) Function
0: Enable AVR
1: Disable AVR
2: Disable AVR when deceleration stop
0
○ ○ ○ ○ ○
00-19
Auto Energy-saving
Operation
0: Disable
1: Enable
0
○ ○ ○ ○
00-20
Source of the Master
Frequency Command
0: Digital keypad (KPV-CE01)
1: RS-485 serial communication
2: External analog input (Pr. 03-00)
3: External UP/DOWN terminal
4: Pulse input without direction command (Pr.10-15
without direction)
5: Pulse input with direction command (Pr.10-15)
0
○ ○ ○ ○
00-21
Source of the Operation
Command
0: Digital keypad (KPV-CE01)
1: External terminals. Keypad STOP disabled.
2: RS-485 serial communication (RJ-11). Keypad STOP
disabled.
0
○ ○ ○ ○ ○
00-22
Stop Method
0: Ramp to stop
1: Coast to stop
0
○ ○ ○ ○ ○
00-23
Reverse Operation
0: Enable reverse
1: Disable reverse
2: Disable forward
0
○ ○ ○ ○ ○