Error Code Description EtherCAT Programming Guide
34-8 March, 2017
34
Returned
value
(Decimal)
Name of the error code Description
57345 ERR_CARD_NO_RESPONSE
No response is sent from the motion card after
the command is sent.
57346 ERR_CARD_CONNECT_FAILED
Connection error of the motion card and the
driver.
57347 ERR_CARD_MEMORY_NOT_ENOUGH
When recording function is applied, number of
motion cards exceeds the limit. (Max. is 24).
57348 ERR_CARD_LOAD_AUTOCONFIG_FILE Fail to load the Autoconfig file.
57349 ERR_CARD_SECURITY_FAILED Security verification failed.
57350
ERR_CARD_UPGRADE_CREATE_
THREAD_FAILED
Fail to open the update window.
57351
ERR_CARD_UPGRADE_NO_
RESPONSE
No response returned during the update.
57352
ERR_CARD_UPGRADE_NO_
RESOURSE
No update file (EtherCAT_DLL) is found.
57353
ERR_CARD_UPGRADE_LOAD_
RESOURSE
Fail to access the updating resource
(EtherCAT_DLL).
57354 ERR_CARD_UPGRADE_TIMEOUT System update timeout.
57355 ERR_CARD_UPGRADE_FAILED System update failure
61440 ERR_ECAT_DLL_IS_USED EtherCAT_DLL file has been opened.
61441 ERR_ECAT_NO_DLL_FOUND
Connection error of EtherCAT_DLL file, RTSS
and DDL file of motion card.
61442 ERR_ECAT_NO_RTSS_DLL_ FOUND
Connection failure of EtherCAT_DLL and
RTSSDLL.
61443 ERR_ECAT_NO_CARD_DLL_ FOUND
Connection between EtherCAT_DLL file and
DLL file of motion card is in error.
61444 ERR_ECAT_NO_ESI_DLL_FOUND
Connection between EtherCAT DLL file and
ESI file (EtherCAT Slave Information) is in
error.
61445
ERR_ECAT_SAME_CARD_
NUMBER
Repeated RTSS or motion card number.
61446 ERR_ECAT_CARDNO_ERROR
A non-existing card number of EtherCAT is
used.
61447 ERR_ECAT_GET_DLL_PATH
Unable to acquire the directory information of
DLL file.
61448 ERR_ECAT_GET_DLL_VERSION Cannot acquire the version information of DLL.
61449 ERR_ECAT_NOT_SUPPORT
DMCNET type API is currently not supported
by EtherCAT.
To Next Page
Loading...
