EtherCAT Programming Guide Error Code Description
March, 2017 34-7
34
Returned
value
(Decimal)
Name of the error code Description
12290 ERR_ECAT_SECURITY_CONNECT
This function fails to access the security
kernel.
32825 ERR_PATH_ECAT_NEED_ENABLE This API requires to be enabled.
32826 ERR_PATH_ECAT_ECAM_ENABLE
This API cannot be executed when E-cam is
enabled.
32827
ERR_PATH_ECAT_ECAM_
MASTERSOURCE
The master axis of E-cam is not set.
53248 ERR_RTX_RTSS_LOAD RTSS cannot be enabled/disabled correctly.
53249 ERR_RTX_CONNECT_LINK_ FAILED
Fail to access RTSS shared memory or the
license verification is failed.
53250 ERR_RTX_EVENT_FAILED Fail to access the RTSS event.
53251 ERR_RTX_CONNECT_FAILED
Failure of handshaking with RTSS shared
memory.
53252 ERR_RTX_CONFIG_EDITED
Restarting the computer is required to activate
the default setting of RTX.
53253 ERR_RTX_SECURITY_FAILED
The RTX license you are using might be a
piracy.
53254 ERR_RTX_COMMANDING
No response when RTX special command is
issued.
53255 ERR_RTX_SYSTEM_NOT_ SUPPORT This API is not supported by RTSS.
53256 ERR_RTX_NOT_SUPPORT The API is not supported by this RTX version.
53257 ERR_RTX_THREAD_CREATE_ FAILED
Fail to enable communication status of RTX
thread
53258 ERR_RTX_RTSS_START_FAILED Fail to enable the RTX system.
53504
ERR_RTX_WIN32_SYSTEM_NOT_
SUPPORT
The callback function is not supported by
Win32 system.
53505 ERR_RTX_CALLBACK_CLOSE
Modifying the callback function is not allowed
when it is enabled.
53506 ERR_RTX_CALLBACK_FUNCTION
Callback function cannot be enabled due to
setting error.
53507 ERR_RTX_CALLBACK_THREAD
When callback function is enabled, the thread
is not correctly executed.
53760 ERR_RTX_ERRORLOG_NOT_ ENABLE Auto recording function is not enabled.
53761
ERR_RTX_ERRORLOG_COUNT_
ERROR
The specified index of error count is wrong.
57344 ERR_CARD_NO_FOUND Motion card is not found.
To Next Page
Loading...
