Delta EtherCAT

EtherCAT Programming Guide Error Code Description
March, 2017 34-33
34
Code in DEC 57346 Code in HEX 0xE002
Name of error
code
ERR_CARD_CONNECT_FAILED
Description Connection error of the motion card and the driver.
Troubleshooting Make sure the driver is successfully installed. Restart the PC if necessary.
Code in DEC 57347 Code in HEX 0xE003
Name of error
code
ERR_CARD_MEMORY_NOT_ENOUGH
Description
When recording function is applied, number of motion cards exceeds the limit.
(Max. is 24).
Troubleshooting
This is caused by the hardware specifications. To use more than 24 motion
cards for recording, please purchase RTX version.
Code in DEC 57348 Code in HEX 0xE004
Name of error
code
ERR_CARD_LOAD_AUTOCONFIG_FILE
Description Fail to load the AutoConfig file.
Troubleshooting
Make sure the AutoConfig file is in the correct directory and re-initialize
EtherCAT Master.
Code in DEC 57349 Code in HEX 0xE005
Name of error
code
ERR_CARD_SECURITY_FAILED
Description Security verification failed.
Troubleshooting Please contact your distributor.
Code in DEC 57350 Code in HEX 0xE006
Name of error
code
ERR_CARD_UPGRADE_CREATE_THREAD_FAILED
Description Fail to open the update window.
Troubleshooting Re-initialize the system for the update.
Code in DEC 57351 Code in HEX 0xE007
Name of error
code
ERR_CARD_UPGRADE_NO_RESPONSE
Description No response returned during the update.
Troubleshooting Re-initialize the system. If the issue persists, please contact Delta.