devention DEVO-12 - 3.4 Dual rate and exponential

User Manual for DEVO-12 Page 135 of 238
servo’s neutral point. The default neutral point is set at 0.0%. The adjustment range of
each channel is shown as below:
English Your language English Your language
Channel name Adjustment range
Right elevator D62.5%-U62.5%
Right aileron 1 R62.5%-L62.5%
Throttle L62.5%-H62.5%
Rudder R62.5%-L62.5%
Left aileron 1 R62.5%- L62.5%
Flap D62.5%- U62.5%
Right aileron 2 R62.5%- L62.5%
Left aileron 2 R62.5%- L62.5%
AUX4 -62.5%- +62.5%
AUX5 -62.5%- +62.5%
Left elevator D62.5%- U62.5%
AUX7 -62.5%- +62.5%
Note: the model names shown will be different with the selected channels different.
Click the icon
to exit after finished.
3.4 Dual rate and exponential
It is possible to use D/R switch to control over the dual rate of elevator, aileron, and
rudder after the function of Dual Rate and Exponential is set up. The setting range is
0-125%. Under the help with exponential curve adjustment, it is not only manually but
also automatically to set up various parameters which are suitable for yourself.
Setting method:
Touch the icon
to enter Function Menu and then click the icon
to enter the interface of Dual Rate and Exponential.