User Manual for DEVO-12 Page 94 of 238
Setting for training function channels
Trainee is available to get full or part of flight control power to the aircraft model via
setting the training function channel in the trainer’s DEVO-12. Below is the setting
method:
Touch the shortcut icon
to enter Function Menu, and then touch
in Function Menu access to Trainer screen. The available channels are shown below,
and the current status of trainer switch TRN is also shown.
English Your language
Current status of Trainer Switch (TRN
SW)
All channels available to be used
Touch the channel(s) which you desire to grant to trainee. The channel(s) you have
touched will be activated as “Active”. The channels which are not granted to trainee
keep inhibited. The default setting is “Inhibit”.
Touch
to save and exit after finished.
3.18 Timer
There are two timers which can be set as stopwatch and countdown, respectively.
Each timer can be operated by switch or by shortcut.
To Next Page
Loading...
