User Manual for DEVO-12 Page 218 of 238
1) Channel selection
Touch the navigation mark of Channel and expand a sub menu and select the desired
item.
2) Point setting
Touch the navigation mark of the point which you want to adjust, and expand a sub
menu with Inhibit and Active. Click Active for adjusting, and then touch its navigation
mark to change the value with a range of ± 100%. The default setting is 0%. The
minus value means the amending direction is downward, and the plus value means
upward.
Click the icon
to exit.
3.10 Gyro sensor
This function offers the gain adjustment for gyro sensor. It is possible to be
automatically switched among various gains through flight mode. The flight mode
should be previously set at Device Select in Model Menu (refer to “2.10 Device
Select”), and the gyro output should also be simultaneously set at Output (refer to
“2.11 Device Output”).
Setting method:
Touch the icon
to enter Function Menu, and then touch the icon
to enter the interface of Gyro Sensor.
To Next Page
Loading...
