Diamond DA 62 - Airspeed Fail; Altitude Fail; G1000 System Warnings; Red X;Yellow X

DA 62 AFM
Emergency
Procedures
3.4 G1000 SYSTEM WARNINGS
3.4.1 RED X/YELLOW X
A red or yellow X through any display field, such as COM frequencies, NAV frequencies,
or engine data, indicates that display field is not receiving valid data.
3.4.2 ATTITUDE FAIL
ATTITUDE FAIL
The display system is not receiving attitude reference
information from the AHRS; accompanied by the
removal of sky/ground presentation and a red X over
the attitude area.
Revert to the standby attitude indicator, part of the Standby Attitude Module.
3.4.3 AIRSPEED FAIL
AIRSPEED FAIL
The display system is not receiving airspeed input
from the air data computer; accompanied by a red X
through the airspeed display.
Revert to the standby airspeed indicator, part of the Standby Attitude Module.
3.4.4 ALTITUDE FAIL
ALTITUDE FAIL
The display system is not receiving altitude input from
the air data computer; accompanied by a red X
through the altimeter display.
Revert to the standby altimeter, part of the Standby Attitude Module.
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 3 - 17