DA 62 AFM Airplane Description
7.10.2 ELECTRONIC ENGINE CONTROL UNIT/ECU
Engine Control and Regulation
The electronic ECU is used to control the engine actuators (e.g. fuel injectors)
according to the engine sensor information. The ECU monitors, controls and
regulates all important parameters for engine operation.
The installed sensors are:
- Oil temperature (lubrication system engine)/OIL TEMP
- Oil pressure (lubrication system engine)/OIL PRES
- Coolant temperature/COOLANT TEMP
- Gearbox temperature/GEARBOX
- Camshaft RPM (twice)
- Crankshaft RPM (twice)
- Fuel pressure in the common rail
- Manifold pressure
- Manifold air temperature
- Ambient air pressure
- Propeller governor/oil pressure
- Power lever position (twice)
- Voltage
- Starter switch signal
- Fuel pressure
- VOTER switch signal
- ECU TEST switch signal
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 7 - 69
To Next Page
Loading...
