DA 62 AFM Airplane Description
Heating and Ventilation
Heating and ventilation are operated using two levers located on the small center console
under the instrument panel.
Right lever: up = HEATING ON (seats, floor)
down = HEATING OFF
Center lever : up = DEFROST ON (airflow to windscreen)
down = DEFROST OFF
The heat of the RH engine is used for the front seats and floor, the heat of the LH engine
is used to defrost the windscreen.
The air inlet for the ventilation system is placed on the underside of the RH wing, inboard
of the engine nacelle. The air is distributed within the cabin via 4 nozzles (2 on the
instrument panel LH/RH side, 2 on the overhead panel. The jet direction of each cone
can be changed easily and the jet intensity can be regulated by rotation of the nozzle.
CAUTION
Do not inadvertently operate the VOTER switch when
adjusting the LH instrument panel ventilation nozzle. In case
of inadvertent switch operation, bring the switch back to the
desired position, typically AUTO.
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 7 - 29
To Next Page
Loading...
