Diamond DA 62 - Altitude Hold; To Maintain a Selected Altitude

Normal Operating
Procedures
DA 62 AFM
NOTE
In ALT mode, the autopilot will maintain the reference altitude
shown in the autopilot window of the PFD regardless of the
altitude in the altitude preselect window or the altimeter's
barometric pressure setting. If the altimeter setting is
changed, the autopilot will climb or descend to maintain the
reference altitude.
END OF CHECKLIST
d) Altitude Hold
To maintain a selected altitude:
1. Altimeter setting . . . . . . . . . . . . . . . . . . . . . . . adjust to appropriate value
2. Reaching desired altitude . . . . . . . . . . . . . . . select ALT on mode controller
3. Green ALT . . . . . . . . . . . . . . . . . . . . . . . . . . . verify on PFD
END OF CHECKLIST
Page 4A - 48 Rev. 0 11-Jan-2019 Doc. No. 11.01.05-E