DA 62 AFM
Handling, Care,
Maintenance
8.4.4 TIRE INFLATION PRESSURE CHECK
1. Remove dust cap from valve stem by turning counterclockwise.
2. Connect tire gauge to valve stem, read pressure.
3. Correct pressure if necessary (nose wheel 3.2 bar/46 psi, main wheels
3.8 bar/55 psi).
4. Install dust cap on valve stem by turning clockwise.
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 8 - 5
To Next Page
Loading...
