DA 62 AFM
Handling, Care,
Maintenance
8.6.2 FRONT AND REAR DOOR
The windscreen and all windows should be cleaned with 'Plexiklar' or any other acrylic
glass detergent if available; otherwise, use lukewarm water. Final cleaning should be
carried out with a clean piece of chamois leather or soft cloth. Never rub or polish dry
acrylic glass.
8.6.3 PROPELLER
Damage and malfunctions during operation must be inspected by authorized personnel.
Surface
The manufacturer uses PU paint or acrylic paint which is resistant to almost any solvent.
The blades may be treated with commercial automotive cleaning agents or preservatives.
The penetration of moisture into the wooden core must be avoided by all means. Should
doubts arise, an appropriately rated inspector must be consulted.
8.6.4 ENGINE
Engine cleaning is part of the scheduled inspections.
8.6.5 INTERIOR SURFACES
The interior should be cleaned using a vacuum cleaner. All loose items (pens, bags etc.)
should be removed or properly stored and secured.
All instruments can be cleaned using a soft dry cloth. Plastic surfaces should be wiped
clean using a damp cloth without any cleaning agents.
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 8 - 13
To Next Page
Loading...
