Diamond DA 62 - Electrical Pedal Adjustment; Forward Adjustment; Rearward Adjustment; Locking

Airplane Description DA 62 AFM
Electrical Pedal Adjustment
NOTE
The pedals may only be adjusted on the ground!
The pedals are adjusted using a rocker switch, located on the outboard sides of the
instrument panel. The related circuit breaker is located on the right side of the instrument
panel.
Forward Adjustment:
To move the pedals forward, depress upper side of switch. When pedals are in correct
position, release switch.
Rearward Adjustment:
To move the pedals in the rearward direction, depress lower side of switch. When pedals
are in correct position, release switch.
Locking:
Upon release, the switch moves automatically to the ‘power off’ position, so locking the
pedals in the present position.
Page 7 - 10 Rev. 0 11-Jan-2019 Doc. No. 11.01.05-E