DA 62 AFM Airplane Description
Hydraulic Gear Extension System Schematic
The main landing gear of the DA 62 is extended with three hydraulic cylinders. The
following schematic figures show the system conditions for each operating mode. The
first figure below shows the extension of the landing gear is shown. To reduce the amount
of pumped hydraulic fluid during this operation, the return flow is partly led into the feeding
flow of the system.
The figure below shows the system status when the landing gear is extended. All hydraulic
cylinders are under high pressure.
Doc. No. 11.01.05-E Rev. 0 11-Jan-2019 Page 7 - 15
To Next Page
Loading...
