Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
119
n
The type of probe test to be performed, either:
l
Ping: Requires the hostname or IP address of the host to be pinged.
l
DNS query: You can perform a DNS query to a named DNS server, or to the DNS servers
configured for the WAN.
l
HTTP or HTTPS test: Requires the URLof the host to be tested.
l
Interface status: Determines if the interface has an IP address assigned to it, that the
physical link is up, and that a route is present to send traffic out of the network interface.
Additional configuration items
n
See Configure SureLink active recovery to detect WAN/WWAN failures for optional SureLink
configuration parameters.
To Next Page
Loading...
