To Next Page

To Previous Page

Interfaces Wide Area Networks (WANs)

AnywhereUSB® Plus User Guide

174

IPv4 Address(es) : 10.10.10.10/24

IPv4 Gateway : 10.10.10.1

IPv4 MTU : 1500

IPv4 Metric : 1

IPv4 Weight : 10

IPv4 DNS Server(s) : 10.10.10.2, 10.10.10.3

IPv6 Status : up

IPv6 Type : dhcpv6

IPv6 Address(es) : fe00:2404::240:f4ff:fe80:120/64

IPv6 Gateway : ff80::234:f3ff:ff0e:4320

IPv6 MTU : 1500

IPv6 Metric : 1

IPv6 Weight : 10

IPv6 DNS Server(s) : fd00:244::1, fe80::234:f3f4:fe0e:4320

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Delete a WAN or WWAN

Follow this procedure to delete any WANs and WWANs that have been added to the system. You

cannot delete the preconfigured WAN, ETH1, or the preconfigured WWAN, Modem.

ÉWebUI

1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > Interfaces.

4. Click the menu icon (...) next to the name of the WANor WWANto be deleted and select

Delete.

5. Click Apply to save the configuration and apply the change.

Digi AnywhereUSB Plus User Manual

Questions and Answers: