Digi AnywhereUSB Plus

Command line interface Command line reference
AnywhereUSB® Plus User Guide
696
analyzer
Analyzer commands.
analyzer clear name STRING
Clears the traffic captured by the analyzer.
Parameters
name
Name of the capture filter to use.
Syntax: STRING
analyzer save filename STRING name STRING
Saves the current captured traffic to a file.
Parameters
filename
The filename to save captured traffic to. The file will be saved to the device's /etc/config/analyzer
directory.
Syntax: STRING
name
Name of the capture filter to use.
Syntax: STRING
analyzer start name STRING
Start a capture session of packets on this devices interfaces.
Parameters
name
Name of the capture filter to use.
Syntax: STRING
analyzer stop name STRING
Stops the traffic capture session.
Parameters
name
Name of the capture filter to use.
Syntax: STRING
clear
Commands to clear the device's status or systems.