Digi AnywhereUSB Plus

Command line interface Command line reference
AnywhereUSB® Plus User Guide
702
modem
Modem commands.
modem at [imei STRING] [name STRING] CMD
Send an AT command to the modem and display the response.
Parameters
cmd
The AT command string.
Syntax: STRING
imei
The IMEI of the modem to execute this CLI command on.
Syntax: STRING
Optional: True
name
The configured name of the modem to execute this CLI command on.
Syntax: STRING
Optional: True
modem at-interactive [imei STRING] [name STRING]
Start an AT command session on the modem's AT serial port.
Parameters
imei
The IMEI of the modem to execute this CLI command on.
Syntax: STRING
Optional: True
name
The configured name of the modem to execute this CLI command on.
Syntax: STRING
Optional: True
modem firmware
Commands for interacting with cellular modem firmware. See Update cellular module firmware for
further information about using the modem firmware commands.
firmware check [imei STRING] [name STRING]
Inspect /opt/[MODEM_MODEL]/Custom_Firmware/ directory for new modem firmware file.