Digi AnywhereUSB Plus

Manage the Hubs using the AnywhereUSB Manager AnywhereUSB Manager window
AnywhereUSB® Plus User Guide
69
Label Description
Mode The AnywhereUSB Manager mode that was selected during
installation: stand-alone or service mode. See Step 2:
Determine how to run AnywhereUSBManager: Service or
stand-alone.
n
Service mode: AnywhereUSB SERVICEMODE
n
Stand-alone mode: AnywhereUSB
Manager Version The version number of the currently installed version of the
AnywhereUSBManager.
Service Version The version number of the currently running service.
Note This displays only when the Manager is installed in
service mode.
Connection Summary A summary of the connection status for each of the Hubs
listed in the AnywhereUSBManager.
For information about the connection status messages, see
AnywhereUSB Manager connection status messages.
AnywhereUSBManager Hub Status pane
When you select an AnywhereUSB Hub in the AnywhereUSB Manager, information about the Hub
displays in the Hub Status pane.
Label Description
State The current state of the Hub. For a list of status messages, see
AnywhereUSB Manager connection status messages.