Services Use the iPerf service
AnywhereUSB® Plus User Guide
299
Use the iPerf service
Your AnywhereUSB Plus device includes an iPerf3 server that you can use to test the performance of
your network.
iPerf3 is a command-line tool that measures the maximum network throughput an interface can
handle. This is useful when diagnosing network speed issues, to determine, for example, whether a
cellular connection is providing expected throughput.
The AnywhereUSB Plus implementation of iPerf3 supports testing with both TCP and UDP.
Note Using iPerf clients that are at a version earlier than iPerf3 to connect to the AnywhereUSB Plus
device's iPerf3 server may result in unpredictable results. As a result, Digi recommends using an iPerf
client at version 3 or newer to connect to the AnywhereUSB Plus device's iPerf3 server.
Required configuration items
n
Enable the iPerf server on the AnywhereUSB Plus device.
n
An iPerf3 client installed on a remote host. iPerf3 software can be downloaded at
https://iperf.fr/iperf-download.php.
Additional configuration Items
n
The port that the AnywhereUSB Plus device's iPerf server will use to listen for incoming
connections.
n
The access control list for the iPerf server.
When the iPerf server is enabled, the AnywhereUSB Plus device will automatically configure its
firewall rules to allow incoming connections on the configured listening port. You can restrict
access by configuring the access control list for the iPerf server.
To Next Page
Loading...
Need help?
General