Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
124
(config network interface my_wan ipv4 surelink target 0)> ping_
size [num]
(config network interface my_wan ipv4 surelink target 0)>
n
dns: Tests connectivity by sending a DNS query to the specified DNS server.
l
Specify the DNS server. Allowed value is the IP address of the DNS server.
(config network interface my_wan ipv4 surelink target 0)> dns_
server ip_address
(config network interface my_wan ipv4 surelink target 0)>
n
dns_configured: Tests connectivity by sending a DNS query to the DNS servers
configured for this interface.
n
http: Tests connectivity by sending an HTTP or HTTPS GET request to the specified URL.
l
Specify the url:
(config network interface my_wan ipv4 surelink target 0)> http_
url value
(config network interface my_wan ipv4 surelink target 0)>
where value uses the format http[s]://hostname/[path]
n
interface_up: The interface is considered to be down based on the interfaces down
time, and the amount of time an initial connection to the interface takes before this test
is considered to have failed.
l
(Optional) Set the amount of time that the interface can be down before this test is
considered to have failed:
(config network interface my_wan ipv4 surelink target 0)>
interface_down_time value
(config network interface my_wan ipv4 surelink target 0)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes
the format number{w|d|h|m|s}.
For example, to set interface_down_time to ten minutes, enter either 10m or 600s:
(config network interface my_wan ipv4 surelink target 0)>
interface_down_time 600s
(config network interface my_wan ipv4 surelink target 0)>
The default is 60 seconds.
l
(Optional) Set the amount of time to wait for an initial connection to the interface
before this test is considered to have failed:
(config network interface my_wan ipv4 surelink target 0)>
interface_timeout value
(config network interface my_wan ipv4 surelink target
0)>
To Next Page
Loading...
Need help?
General