Digi AnywhereUSB Plus User Manual

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
168
provisioned from the carrier.
Format:
AT&T
Rogers
Sprint
T-Mobile
Telstra
Verizon
Vodafone
other
Default value: AT&T
Current value: AT&T
(config network interface my_wwan)>
b. Set the carrier:
(config network interface my_wwan)> modem carrier value
(config network interface my_wwan)>
n
iccid
Set the unique SIMcard ICCIDthat must be in active for this WWAN to be used:
(config network interface my_wwan)> modem iccid ICCID
(config network interface my_wwan)>
n
imsi
Set the International Mobile Subscriber Identity (IMSI) that must be in active for this
WWAN to be used:
(config network interface my_wwan)> modem imsi IMSI
(config network interface my_wwan)>
n
plmn_id
Set the PLMN id that must be in active for this WWAN to be used:
(config network interface my_wwan)> modem plmn_id PLMN_ID
(config network interface my_wwan)>
n
sim_slot
Set which SIM slot must be in active for this WWAN to be used:
(config network interface my_wwan)> modem sim_slot value
(config network interface my_wwan)>
where value is either 1 or 2.
7. Set the PIN for the SIM. Leave blank if no PIN is required.
(config network interface my_wwan)> modem pin value
(config network interface my_wwan)>

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English