Services Configure SSHaccess
AnywhereUSB® Plus User Guide
234
loopback
setup
(config)>
Repeat this step to list additional firewall zones.
4. (Optional) Set the private key in PEM format. If not set, the device will use an automatically-
generated key.
(config)> service ssh key key.pem
(config)>
5. (Optional) Configure Multicast DNS (mDNS)
mDNS is a protocol that resolves host names in small networks that do not have a DNS server.
mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:
n
To enable the mDNS protocol:
(config)> service ssh mdns enable true
(config>
n
To disable the mDNS protocl:
(config)> service ssh mdns enable false
(config)>
6. (Optional) Set the port number for this service.
The default setting of 22 normally should not be changed.
(config)> service ssh port 24
(config)>
7. To create custom SSHconfiguration settings:
a. Enable custom configurations:
(config)> service ssh custom enable true
(config)>
b. To override the standard SSHconfiguration and only use the config_file parameter:
(config)> service ssh custom override true
(config)>
n
If override is set to true, entries in Configuration file will be used in place of the
standard SSHconfiguration.
n
If override is set to false, entries in Configuration file will be added to the
standard SSHconfiguration.
The default is false.
To Next Page
Loading...
Need help?
General