Get started with your AnywhereUSB Step 1: Verify product components
AnywhereUSB® Plus User Guide
29
Equipment Description
Additional power cord IEC power cord
See Step 4: Connect the power supply.
Note Digi recommends that you purchase an additional power
cord for the following reasons:
**More power is needed if you use all 24 ports.
**If you do not use all 24 ports, two power cords maintain
redundancy if one power supply fails. Digi also recommends
plugging each power cord into separate main power circuits.
**Helps maximize heat dissipation.
SFP+ modules
Connect an SFP transceiver module for fiber connection, such as
Finisar Network FTLX8574D3BCL SFP+.
Console cable RS232 DB9 Console cable
Use the console cable to establish a serial connection from the
serial port on your device to your local laptop or PC. See Console
port.
Regional power cable For information about regional power cable requirements, see
Additional power and cabling requirements:AnywhereUSB Plus 8
and 24.
Optional additional equipment for connecting to a cellular network
This equipment is required only if you want to connect to a cellular network. See OPTIONAL: Use the
COREmodule to connect to the cellular network (AnywhereUSB 8 and 24 port devices ONLY).
Equipment Description
Digi CORE®module
SIMcard An activated SIM card provided by your cellular network operator.
You can insert up to two SIMcards in the CORE module.
The COREmodule supports the standard mini-SIM cards (2FF).
To Next Page
Loading...
Need help?
General