Digi AnywhereUSB Plus

Firewall Configure Quality of Service options
AnywhereUSB® Plus User Guide
396
n
IPv6 address: Only traffic from the IP address typed in IPv6address will be
matched. Use the format IPv6_address[/prefix_length], or use any to match
any IPv6 address.
n
MAC address: Only traffic from the MACaddress typed in MACaddress will be
matched.
ix. Click to expand Destination address and select the Type:
n
Any: Traffic destined for anywhere will be matched.
n
Interface: Only traffic destined for the selected Interface will be matched.
n
IPv4 address: Only traffic destined for the IP address typed in IPv4address
will be matched. Use the format IPv4_address[/netmask], or use any to match
any IPv4 address.
n
IPv6 address: Only traffic destined for the IP address typed in IPv6address
will be matched. Use the format IPv6_address[/prefix_length], or use any to
match any IPv6 address.
Repeat to add a new rule. Up to 30 rules can be configured.
10. Click Apply to save the configuration and apply the change.