Digi AnywhereUSB Plus User Manual

Central management Configure Digi Remote Manager
AnywhereUSB® Plus User Guide
458
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
13. (Optional) Configure the AnywhereUSB Plus device to communicate with remote cloud
servicesby using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination drm_phone_number
(config)>
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
1. (Optional) Configure the AnywhereUSB Plus device to communicate with remote cloud
servicesby using an HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
b. Set the hostname of the proxy server:
(config)> cloud drm proxy host hostname
(config)>
c. (Optional) Set the port number on the proxy server that the device should connect to. The
default is 2138.
(config)> cloud drm proxy port integer
(config)>
14. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
15. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English