EasyManuals Logo

Digi AnywhereUSB Plus User Manual

Digi AnywhereUSB Plus
815 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #593 background imageLoading...
Page #593 background image
Virtual Private Networks (VPN) IPsec
AnywhereUSB® Plus User Guide
593
b. Set the test type:
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
test value
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
where value is one of:
n
ping (IPv4) or ping6 (IPv6): Tests connectivity by sending an ICMP echo request to a
specified hostname or IP address.
l
Specify the hostname or IP address by using ping_host or ping_host6:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_host host
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
l
(Optional) Set the size, in bytes, of the ping packet by using ping_size or ping_
size6:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_size [num]
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n
dns (IPv4) or dns6 (IPv6): Tests connectivity by sending a DNS query to the
specified DNS server.
l
Specify the DNS server. Allowed value is the IP address of the DNS server.
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> dns_server ip_address
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n
dns_configured (IPv4) or dns_configured6 (IPv6): Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
n
http (IPv4) or http6 (IPv6): Tests connectivity by sending an HTTP or HTTPS GET
request to the specified URL.
l
Specify the url. Allowed value uses the format http[s]://hostname/[path].
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> http_url url
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n
interface_up (IPv4) or interface_up6 (IPv6): : The interface is considered to be
down based on the interfaces down time, and the amount of time an initial
connection to the interface takes before this test is considered to have failed.
l
(Optional) Set the amount of time that the interface can be down before this
test is considered to have failed:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi AnywhereUSB Plus and is the answer not in the manual?

Digi AnywhereUSB Plus Specifications

General IconGeneral
BrandDigi
ModelAnywhereUSB Plus
CategorySwitch
LanguageEnglish

Related product manuals