Virtual Private Networks (VPN) OpenVPN
AnywhereUSB® Plus User Guide
609
n
Certificates and keys:
l
The CA certificate (usually in a ca.crt file).
l
The Public key (for example, server.crt)
l
The Private key (for example, server.key).
l
The Diffie Hellman key (usually in dh2048.pem).
n
Active recovery configuration. See Configure SureLink active recovery for OpenVPN for
information about OpenVPN active recovery.
Additional configuration items
n
The route metric for the OpenVPN server.
n
The range of IP addresses that the OpenVPN server will provide to clients.
n
The TCP/UDP port to use. By default, the AnywhereUSB Plus device uses port 1194.
n
Access control list configuration to restrict access to the OpenVPN server through the firewall.
n
Additional OpenVPN parameters.
ÉWebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > OpenVPN > Servers.
4. For Add, type a name for the OpenVPN server and click g.
The new OpenVPN server configuration is displayed.
To Next Page
Loading...
Need help?
General