Digi AnywhereUSB Plus User Manual

Virtual Private Networks (VPN) OpenVPN
AnywhereUSB® Plus User Guide
619
4. Add an OpenVPN authentication user:
a. Click Authentication > Users.
b. For Add, type a name for the user (for example, OpenVPN_User) and click g.
c. Type a password for the user.
This password is used for local authentication of the user. You can also configure the user
to use RADIUS or TACACS+ authentication by configuring authentication methods. See
User authentication methods for information.
d. Click to expand the Groups node.
e. Click gto add a group to the user.
f. Select a Group with OpenVPN access enabled.
5. Click Apply to save the configuration and apply the change.

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English