Using the Configuration Menu
26 Chapter 3
Using the Configuration Menu
Adding and Configuring a PC Card
To add a modem card, compact-flash card, wireless LAN card, or a network
card to the Digi CM using the configuration menu, do the following:
1. Access the configuration menu.
2. Choose PC Card configuration then Discover a new card.
The system searches for the card and displays information on the product
model number and type of card.
3. Configure the card by choosing Change card configuration.
4. Use the ESC key to backout to the main configuration menu.
5. Choose Save changes.
To Next Page
Loading...
