Digi CM 32 - Sniff Session

Configuring User Access Control
48 Chapter 7
Sniff Session
A sniff session enables users access to a serial port for viewing the data
stream. Users who are registered for a Sniff session can access a specific
serial port even if another user is using the port. The Digi CM supports up to
four concurrent sniff sessions, three concurrent sniffers on one port, and a
total of ten authorized sniff users. (See the preceding screenshot for
reference).
There are four options for a Sniff Session mode. The four options are:
disabled, input, output, and both.
• disabled: The sniff mode is disabled and no user can enter a sniff
session
log in
port 3
log in
port 3
Network (Ethernet)
serial
Sniff Session
Main Session
Port 3
(Read only access)
(
Read/write access
)