Digi CM 32 - Using the Configuration Menu

Using the Configuration Menu
32 Chapter 4
Using the Configuration Menu
Host Mode Configuration
1. Access the configuration menu.
2. Choose Serial port configuration > choose an individual port number or 0
(zero) for all ports > Host mode configuration.
3. Enter the desired parameters for each menu item.
4. Use the ESC key when all parameters are entered to return to the main
menu.
5. Choose Save changes.
Port Parameters
1. Access the configuration menu.
2. Choose Serial port configuration > choose an individual port number or 0
(zero) for all ports.
3. Enter the desired parameters for each menu item.
4. Use the ESC key when all parameters are entered to return to the main
menu.
5. Choose Save changes.