Using the Configuration Menu
52 Chapter 7
Sniff Sessions
To configure a port or all ports for sniff users, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > User access
control.
4. Choose a menu item and enter the desired parameters for the menu items.
5. Use the ESC key when all parameters are entered to return to the main
menu.
6. Choose Save changes.
To enter a sniff session, see "Viewing A Sniff Session" on page 49.
Authentication
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > Authentication.
4. Choose Authentication type.
5. Use the ESC key to return to the main menu.
6. Choose Save changes.
To Next Page
Loading...
