Digi IX30

Interfaces Wide Area Networks (WANs)
IX30 User Guide
113
c. For Interface type, select Modem.
d. For Zone, select External.
e. For Device, select Modem .
f. (Optional): Configure the public APN. If the public APN is not configured, the IX30 will
attempt to determine the APN.
i. Click to expand APN list > APN.
ii. For APN, type the public APN for your cellular carrier.
g. For Add Interface, type WWAN_Private and click .
h. For Interface type, select Modem.
i. For Zone, select External.
j. For Device, select Modem .
This should be the same modem selected for the WWAN_Public WWAN.
k. Enable APN list only.
l. Click to expand APN list > APN.