Digi IX30 User Manual

Interfaces Wide Area Networks (WANs)
IX30 User Guide
141
n
any
n
carrier
Set the cellular carrier must be in active for this WWAN to be used:
a. Use ? to determine available carriers:
(config network interface my_wwan)> modem carrier
Match SIM carrier: The SIM carrier match criteria. This
interface is applied when the SIM card is
provisioned from the carrier.
Format:
AT&T
Rogers
Sprint
T-Mobile
Telstra
Verizon
Vodafone
other
Default value: AT&T
Current value: AT&T
(config network interface my_wwan)>
b. Set the carrier:
(config network interface my_wwan)> modem carrier value
(config network interface my_wwan)>
n
iccid
Set the unique SIMcard ICCIDthat must be in active for this WWAN to be used:
(config network interface my_wwan)> modem iccid ICCID
(config network interface my_wwan)>
n
imsi
Set the International Mobile Subscriber Identity (IMSI) that must be in active for this
WWAN to be used:
(config network interface my_wwan)> modem imsi IMSI
(config network interface my_wwan)>
n
plmn_id
Set the PLMN id that must be in active for this WWAN to be used:
(config network interface my_wwan)> modem plmn_id PLMN_ID
(config network interface my_wwan)>

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM