Digital Projection E-Vision 7500 Series User Manual

Digital Projection E-Vision 7500 Series THE OPERATION COMMANDS Remote Communications Guide
63
Rev D July 2014
...continued from previous page
<operation> <command> <values> Notes
auto.img (execute) Auto Sync
Not applicable in STANDBY mode or without signal
locked.
hsg.r.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.g.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.b.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.c.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.m.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.y.gain = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.r.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.g.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.b.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.c.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.m.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.y.sat = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
hsg.r.hue = ? + - 0 ~ 200 Not applicable in STANDBY mode or without signal
locked.
continued on next page...
Notes

Digital Projection E-Vision 7500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision 7500 Series
Category	Projector
Language	English