Domino G230i

HEALTH AND SAFETY
25257 Issue 3 November 2013 1-3
INTRODUCTION
Domino supplies Safety Data Sheets (SDS) giving specific safety information
with each of its inks. The following notes are for general guidance only.
Basic Requirements
• Read the relevant Safety Data Sheet (SDS) before storing, handling,
transporting or using the ink cartridges
• Ensure the power switch on the underside of the printer is OFF before
connecting the power cord to the printer or to the power source
• Disconnect the power before opening the printer cabinet
• Disconnect the power before making any wiring connections
• To maintain the environmental rating of the cabinet, route external
wiring cables through the cable glands and strain relief provided on the
underside of the cabinet
• Ensure all cables are secured away from moving production line
components
• Switch OFF or disconnect the power before connecting or disconnecting
a print head
• Switch OFF the print group before removing and/or installing a print
cartridge
• Use only lint free wipes when cleaning the cartridge nozzles
• Clean cartridge nozzles according to the enclosed recommendations
• Protect the print heads from impact with proper adjustment and
alignment of side rails and product guides
• Do not open any enclosed components of the printer or print heads.
They contain no user-serviceable parts.