INSTALLATION
25257 Issue 3 November 2013 6-13
Print Head Mount for 2-Axis Bracket
Three 4mm threaded holes are provided for mounting the print head in either
a vertical or horizontal position. Two 4mm bolts and a mounting bracket are
required to attach it to the mounting frame.
Up to four print heads can be joined in a staggered array, utilising the two
3mm threaded countersunk holes provided for the 3mm machine screws.
29mm
112mm
105mm
48mm
20mm
8mm
20mm
4mm Bolt
33mm
15mm
Print Head Mount
To Next Page
Loading...
