25257 Issue 3 November 2013 7-3
INTRODUCTION
The OEM Board is designed for integration by OEM’s and integrators. It is
suited in applications where control of the printer is required by a remote
source (HMI or PC) allowing the printer to be embedded in the machinery.
OEM Board Description
The OEM Board has no LCD or keyboard and consists of the G-Series board
and two power supplies. It has the same configuration as the G320i - see
“Configuration” on page 2-8.
The OEM Board can be paired with the G-View Browser to provide a system
that can be controlled remotely via a PC or HMI - see “G-View Browser”
on page 6-19.
To Next Page
Loading...
