Domino G230i User Manual

DISPLAY MESSAGES AND FAULT FINDING
25257 Issue 3 November 2013 4-19
12024 CAN-Drv: send error CAN-Driver, send error counter too
high
Error list: Application message
Message category: Alarm
Remedial action: CAN-Bus is out of
order, Check CAN lines and load
resistance
12100 CAN: nodeguard no xx Error in cyclic fieldbus module
monitoring. Module with CAN
address xx is not available any more.
Error list: Application message
Message category: Alarm
Remedial action: CAN-Bus is out of
order. Check CAN lines and load
resistance
12101 CAN-nodestate no xx
nmt:yy n:zz
Error in cyclic fieldbus module
monitoring. Module with CAN
address xx reports wrong status
Error list: Application message
Message category: Alarm
Remedial action: Check CAN lines
and load resistance
12105 CAN-disfunction xx cccc
rr hhhh
Error message of fieldbus module with
CAN address xx. Error code=ccc,
error register=rr, manufacturer specific
error code=hhhh
Error list: Application message
Message category: Alarm
Remedial action: Check configuration
of input and output. Check CAN lines
and load resistance. Check CAN
addresses of the modules
12106 CAN: not found node xx Fieldbus module with CAN address xx
not found
Error list: Application message
Message category: Alarm
Remedial action: Check configuration
of input and output. Check CAN lines
and load resistance. Check CAN
addresses of the modules
No. Error Text Description

Domino G230i Specifications

General

Brand	Domino
Model	G230i
Category	Laboratory Equipment
Language	English