Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

124

3. Check the box of Check to enable the Filter Rule. Type the comments (e.g., block_all).

Choose Block If No Further Match for the Filter setting. Then, click OK.

Note: In default, the router will check the packets starting with Set 2, Filter Rule 2 to

Filter Rule 7. If Block If No Further Match for is selected for Filter, the firewall of

the router would check the packets with the rules starting from Rule 3 to Rule 7. The

packets not matching with the rules will be processed according to Rule 2.

4. Next, set another rule. Just open Firewall>>Filter Setup. Click the Set 2 link and

choose the Filter Rule 3 button.

5. Check the box of Check to enable the Filter Rule. Type the comments (e.g., open_ip).

Click the Edit button for Source IP.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General