Vigor2925 Series User’s Guide
208
Enable
Check the box to enable such function.
Quota Limit
Type the data traffic quota allowed for such WAN
interface. There are two unit (MB and GB) offered for you
to specify.
When quota exceeded
Check the box(es) as the condition(s) for the system to
perform when the traffic has exceeded the budget limit.
Shutdown WAN interface – All the outgoing traffic
through such WAN interface will be terminated.
Send Mail Alert to Administrator – The system will send
out a warning message to the administrator when the quota
is running out. However, the connection charges will be
calculated continuously.
Send SMS messages to Administrator - The system will
send out SMS message to the administrator when the quota
is running out.
Monthly
Some ISP might apply for the network limitation based on
the traffic limit per month. This setting is to offer a
mechanism of resetting the traffic record every month.
Data quota resets on day … –You can determine the
starting day in one month.
Custom
This setting allows the user to define the billing cycle
according to his request.
The WAN budget will be reset with an interval of billing
cycle.
Custom – Monthly is default setting. If long period or a
short period is required, use Custom. The period of billing
cycle is between 1 day and 60 days. You can determine the
cycle duration by specifying the days and the hours. In
addition, you can specify which day of current day in a
cycle.
Cycle duration: Specify the days to reset the traffic
record. For example, 7 means the whole cycle is 7 days;
20 means the whole cycle is 20 days. When the time is
up, the router will reset the traffic record automatically.
Today is day – Specify the day in the cycle as the
starting point which Vigor router will reset the traffic
record. For example, 3 means the third day of the billing
cycle.
To Next Page
Loading...
Need help?
General
