Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

251

4. Click any Index number link (e.g., 1 in this case). Configure the settings as follows.

Now, if you want such route policy will be applied by Vigor router with higher priority,

please adjust the value of Priority for such route policy. In general, default route is

specified with the lowest priority for it value is fixed as “250”. And Routes in Routing

Table are fixed as “150”. You can adjust the value for such route policy with lower value,

e.g., 100 to ensure it will be applied to packets transmission with the highest priority.

5. After finished the above settings, click OK to save the configuration.

6. To route the packets coming from the Firewall Router back to the remote router, access

into the web user interface of the Firewall Router. Then, set “192.168.1.1/24” as the

gateway IP address and set “172.16.3.0/24” as the destination IP address.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General