Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

349

3. For adding a new rule, click Add to open the following page.

Available settings are explained as follows:

Item Description

ACT

Check this box to invoke these settings.

Hardware

Acceleration

Check this box to enable the hardware acceleration when

such rule is applied.

Ethernet Type

Please specify which protocol (IPv4 or IPv6) will be used

for this rule.

Local Address

Click the Edit button to set the local IP address (on LAN)

for the rule.

Remote Address

Click the Edit button to set the remote IP address (on

LAN/WAN) for the rule.

Address Type – Determine the address type for the source

address.

For Single Address, you have to fill in Start IP address.

For Range Address, you have to fill in Start IP address and

End IP address.

For Subnet Address, you have to fill in Start IP address

and Subnet Mask.

DiffServ CodePoint

All the packets of data will be divided with different levels

and will be processed according to the level type by the

system. Please assign one of the levels of the data for

processing with QoS control.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General