Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
367
E
E
x
x
t
t
e
e
r
r
n
n
a
a
l
l
T
T
A
A
C
C
A
A
C
C
S
S
+
+
It means Terminal Access Controller Access-Control System Plus. It works like RADIUS
does. Click the TACACS+ Setup to open the following page:
Available settings are explained as follows:
Item Description
Enable
Check to enable TACACS+ feature.
Server IP Address
Enter the IP address of TACACS+ server.
Destination Port
The UDP port number that the TACACS+ server is using.
Shared Secret
The TACACS+ server and client share a secret that is used
to authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Confirm Shared Secret
Re-type the Shared Secret for confirmation.
After finished the above settings, click OK button to save the settings.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)