Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
383
4
4
.
.
1
1
1
1
.
.
1
1
1
1
.
.
2
2
C
C
o
o
n
n
f
f
i
i
g
g
S
S
y
y
n
n
c
c
This page is used to specify the synchronization time for such Vigor router and only available
when Hot-Standby method is specified and High Availability is enabled.
Available settings are explained as follows:
Item Description
Enable Config Sync (Max.
Sync to 10 routers)
Check this box to enable configuration synchronization.
To sync configuration from primary to secondary router,
both primary and seconday routers need to enable “config
sync”. Note that config sync can be enabled by
Hot-Standby redundancy method only.
Config Sync Interval
Day / Hour / Minute - Primary router will sync its
configuration to secondary router based on the time interval
set here.
After finishing all the settings here, please click OK to save the configuration.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)